Displaying System Board Information - Fujitsu SPARC Enterprise M4000 Features Manual

3.1.3

Displaying System Board Information

The showboards(8) command displays system board information including the
domain ID of the domain to which the target system board belongs and various
kinds of system board status in list format.
Use the showboards(8) command before a DR operation to determine whether the
system board status permits DR operations, and to confirm the domain ID of the
domain to which the target system board belongs. The showboards(8) command is
also used after a DR operation to confirm system board status.
To change domain settings or register a system board in the DCL, use the setdcl(8)
command. To change PSB settings, use the setupfru(8) command.
The following examples show the format and options of the showboards(8)
command.
showboards [-v] -a [-c sp]
showboards [-v] -d domain _id [-c sp]
showboards [-v] xsb
showboards -h
TABLE 3-7
Option
-v
-a
-h
-d domain_id
xsb
-c sp
Options of the showboards Command
Description
Displays detailed information about the system board.
Displays information about all mounted system boards.
Displays the usage information.
Displays information about the specified domain, where domain_id is
the domain number, possibly 0 to 23, depending on your server. Only
one domain ID can be specified.
Displays information about the specified XSB.
Specify xsb in the XX-Y format. (XX = 00 to 15, Y = 0 to 3). The value
depends on your server.
Displays information about system boards in system board pool.
Chapter 3 DR User Interface 3-7