Configuring Funk Security Using The Profile Wizard - Intermec CN3 Series User Manual

Chapter 3 — Configuring the Computer
84
Configuring Static WEP Security With Funk Security
1 Make sure you have selected Funk as your security choice.
2 Make sure you have configured the communications and
radio parameters on your CN3.
3 Open Intermec Settings.
4 Choose Communications > 802.11 Radio > Funk Security
> Profile.
5 For Association, choose Open.
6 For Encryption, choose WEP.
7 For 8021x, choose None.
8 Define a value for the keys you want to use. You can define up
to four keys (Key 1 through Key 4).
Enter an ASCII key or a hex key that is either 5 bytes or 13
bytes long depending on the capability of the radio. Set a 5-
byte value for 64-bit WEP or a 13-byte value for 128-bit
WEP. Hex keys must be preceded by 0x and contain 5 or 13
hex pairs.
9 For Transmit key, choose the key you want to use for
transmitting data.
10 Exit Intermec Settings.

Configuring Funk Security Using the Profile Wizard

You can start 802.11 b/g communications on the CN3 using the
Profile Wizard. A profile contains all the information necessary to
authenticate you to the network, such as login name, password or
certificate, and protocols by which the CN3 is authenticated. You
can have up to four profiles for different networks. For example,
you may have different login names or passwords on different
networks.
To select a profile for Funk security
1 Select Start > Settings > the Systems tab > Wireless
Network.
or
Tap the iConnect icon (
Today screen and select Tools > Wireless Settings.
) in the lower right corner of the
CN3 Series Mobile Computer User's Manual