Configuring The Computer To Communicate With A Wireless Scanner - Intermec 741 User Manual

Configuring the Computer to Communicate With a Wireless Scanner

741 and 751 Mobile Computers (Windows Mobile 5.0) User's Manual
This section explains how to configure the computer to communicate with
Bluetooth wireless scanners. The computer ships with a Bluetooth
association label attached to the left side. Scan the association label to
quickly connect the computer to the Bluetooth wireless scanner, such as the
SF51 or SR61.
If for some reason the Bluetooth association label does not work, you can
follow the procedure for configuring the computer from Intermec Settings
at the end of this section.
To configure Bluetooth communications on the computer
1 Select Start > Settings > the System tab > Intermec Settings.
2 Select Communications > Bluetooth.
3 If you want to allow incoming connections from wireless scanners, you
must enable these two parameters:
• Discoverable
• Connectable
If you do not want to allow incoming connections, make sure both
parameters are disabled.
4 Save your changes and exit Intermec Settings.
To connect to the wireless scanner using the association label
1 Using your wireless scanner, scan the Bluetooth association label on the
side of the computer.
2 The computer prompts you to enter the passcode for your scanner. The
default passcode for Intermec Bluetooth scanners is
3 Tap Finish.
To connect to the wireless scanner using Intermec Settings
1 Select Start > Settings > the System tab > Bluetooth Scanner Wizard.
2 Tap Add Device. The wizard advances to the next screen.
3 Select how you would like to set your scanner (the default is Search)
and then click Next. The computer starts discovering scanners.
4 Select the scanner you want to connect to from the Devices list and then
tap Next.
5 When prompted to add the scanner to your device list, tap Yes.
6 In the Passcode text box, enter the passcode for your scanner. The
default passcode for Intermec Bluetooth scanners is
7 Tap Next. The computer connects to the scanner and displays the
remote device information.
8 Tap Finish.
Chapter 3 — Configuring the Computer
.
0000
.
0000
41