Table 5-20 Switch Setting For Sw1 On T1 Card; Figure 5-11 Connection Of T1 Rate Interface - Panasonic DBS 576 Technical Manual

Section 300-Installation
Table 5-20. Switch Setting for SW1 on T1 Card
Switch No.
6. Insert the T1 card into the specified flexible slot (see page 4-36).
7. Connect the 8-conductor modular jack via the CSU to the T1 carrier line.
8. Pass the cable with 8-conductor modular jack through the wiring aperture of the
Figure 5-11. Connection of T1 Rate Interface
576-13-300
Distance from the DBS 576 to the CSU
0 to 150 ft.
SW1-1 ON
SW1-2 OFF
SW1-3 OFF
SW1-4 OFF
SW1-5 OFF
SW1-6 OFF
SW1-7 OFF
SW1-8
cabinet and connect it to the modular connector on the T1 card.
DBS 576 (USA), issued 6/2/98
Chapter 5 - Trunks and Extensions
150 to 450 ft.
OFF
ON
OFF
ON
OFF
ON
OFF
Not used
450 to 655 ft.
OFF
OFF
ON
OFF
ON
OFF
ON
5-27