Section 300-Installation
Front Cover
Installation
Removing the front cover
1. Remove the four screws from the front cover.
2. Pull the bottom of the front cover out by about 3/4".
Note:
as doing so may distort the claw slots.
3. Gently lift the cover off by sliding it up and away.
Replacing the front cover
1. Hook the front cover onto the front cover mounting claws of the cabinet.
2. Secure the four screws.
Figure 3-2. Removing and replacing front cover of base cabinet
576-13-300
Do not exert excessive force when pulling out the bottom of the front cover
DBS 576 (USA), issued 6/2/98
Chapter 3. Cabinet Installation
3-3