Chapter 4. - Installing Additional Cabinets
2. Attach the MDF Interface Circuit card supplied with the CBLDBS as shown.
Figure 4-30. Connecting the CBLDBS
3. Connect the CBLDBS MDF Ground Cable to a screw on the cabinet frame.
4. Use the supplied cable to connect the bottom connector of the TSW288/
5. Use the supplied cable to connect the top connector of the TSW288/TSW576
4-30
TSW576 card installed in the OP1 slot of the base cabinet to the connector at the
bottom of the CBLDBS card installed in the AUX1 slot of the DBS 96.
card installed in the OP1 slot in the base cabinet to the top connector of the
CBLDBS card installed in the AUX1 slot of the DBS 96.
DBS 576 (USA), issued 6/2/98
Section 300-Installation
576-13-300