Card Installation; Connecting The Systems - Panasonic DBS 576 Technical Manual

Section 300-Installation

Card Installation

Guidelines
• Install the cards in the base cabinet and DBS 96 in the slots indicated under "Card
• In the DBS 96, you can only install DEC cards. You cannot increase the number
• Each additional DBS 96 cabinet increases the number of extension ports by up to
Installation
See "Card Installation" in Chapter 3 (page 3-13) for how to install cards in the base
cabinet.
See the DBS Installation and Programming Manual for details of how to install cards
in the DBS 96.

Connecting the Systems

Guidelines
• When expanding a system, use the supplied cables to connect the TSW288/
• Use the TSW288 card when the CPC-288 is used. Use the TSW576 card when the
Installation
1. Remove the one or two interface boards from the top of the DBS cabinet and
576-13-300
Installation Position" in Chapter 4 (page 4-33).
of Trunk Line ports.
72.
CAUTION:
• Turn the power switch and the external broker OFF, and disconnect the
AC cable before installing the backup battery.
• To prevent EMI interference to TVs, radios, etc., install an EMI filter.
TSW576 card to the CBLDBS card.
CPC-576 is used.
retain the screws.
DBS 576 (USA), issued 6/2/98
Chapter 4. - Installing Additional Cabinets
4-29