Panasonic DBS 576 Technical Manual page 121

Section 300-Installation
Figure 4-34. Card installation positions in system comprising DBS 576 and DBS 96
Slot
CPC
OP1
OP2
FS1 to FS12
FS10 to FS11
FS12
TRK1 to TRK3
EC1 to EC8, EC/TRK
SCC, CPC, AUX1
AUX2
**1
: Always mount in CPC slot of Base main cabinet.
*2
: Always mount in CPC slot of Expansion main cabinet.
*3
: Certain limitations apply (see page 4-36)
*4
: Cannot be installed in top main cabinet when used in two- or three-main cabinet configuration.
Example:.
*5
: By setting the switch and reprogramming, the PRI/23 card can be set for S-point (extension
lines) or T-point (trunks) (see page 5-22,5-45)
*6
: Use the TSW288 card with the CPC-288. Use the TSW576 card with the CPC-576.
*7
: VSSC card must be installed into FS11. FS12 must be kept free due to the width of the HDD
and to allow for heat dissipation.
576-13-300
Trunks Digital
Analog
Extension Digital
lines
Analog
Options/Audio
applications
Digital
extension
lines
DBS 576 (USA), issued 6/2/98
Chapter 4. - Installing Additional Cabinets
Card
Base
*1
CPC288, CPC-576
*6 *6
TSW288 , TSW576
SCC
*3 *3*5
T1 , TBRI/4, PRI/23
LTRK/8, LGTRK/8, DIDTR/8, E&M/4
*3*5
DEC/8, SBRI/4, PRI/23
AEC/8
*3
MFR/8, CONF
*4 *4
VPU/4 , VPU/8 , VSSC
*7
Use DBS 576 Base cabi-
net
Expand-1 Expand-2 to 6
*2 *2
CBL CBL
No cards
*4 *7
No cards
No cards
DEC
No cards
CBLDBS
4-35