Chapter 1. Requirements; Model Numbers; Fcc Requirements; Table 1-1 Dbs 576 Model Numbers - Panasonic DBS 576 Technical Manual

Chapter 1. Requirements

This chapter describes DBS 576 model numbers, information on the installation
environment, and how to clean the DBS 576.

Model Numbers

Table 1-1. DBS 576 model numbers
Designation
96 port Cabinet
96 port Expansion Cabinet

FCC Requirements

General Requirements

• The Federal Communications Commission (FCC) has established Rules which
• This equipment may not be used on coin service provided by the telephone
• Key FCC information appears in the following table.
Table 1-2. FCC information
Item
FCC Registration Number
Ringer Equivalence Number
Network Address
Signaling Code
* The Ringer Equivalence Number (REN) is useful to determine the quantity of
devices that you may connect to your telephone line and still have all of those
devices ring when your number is called. In most, but not all areas, the sum of the
RENs of all devices on any one line should not exceed five (5). To be certain of the
number of devices you may connect to your line, as determined by the REN, you
should call your telephone company to determine the maximum REN for your call-
ing area.
• Before connecting the DBS 576, provide the telephone company with the
576-13-300
permit the DBS 576 to be directly connected to the telephone network. FCC
Compliant standardized jacks are used for these connections.
company. This equipment should not be used on party lines.
following information:
DBS 576 (USA), issued 6/2/98
Product Name
Base Cabinet
Expansion Cabinet
Specification
When used as a key system: JNVUSA-32340-KF-E
When used as a PBX: JNVUSA-32339-MF-E
Loop start - 0.5B/2.8DC* ; DID - 0.0B*
E
Product Number
VB-44020
VB-44021
1-1