Table 2-8 Led Indications Of Cbl Card; Figure 2-9 Cbl Card - Panasonic DBS 576 Technical Manual

Section 300-Installation
CBL card (VB-44451): Building Block card
The CBL card is required for interconnecting cabinets in the DBS 576 system. The
TSW288 or TSW576 card is also necessary for the interconnection of cabinets
(building block connection).
The CBL card must be mounted in the CPC slot of all cabinets other than the master
cabinet. A dedicated interconnect cable pair connects between cabinets. The
connection to the master base cabinet is to the TSW288/TSW576 card, which is
mounted in the OP1 slot.
A rotary switch on the CBL card identifies the cabinet to the rest of the system (1 -
first additional cabinet, 2 - second additional cabinet, etc.). Up to 5 additional
cabinets can be installed and each must be uniquely identified.
Figure 2-9. CBL card
Table 2-8 shows the LED indication.
Table 2-8. LED indications of CBL card
LED indication
LED1 (RUN)
576-13-300
Description
Flashes red when operating.
DBS 576 (USA), issued 6/2/98
Chapter 2. System Overview
2-13