Card Installation Position; Figure 4-32 Card Installation Positions In Single Cabinet System - Panasonic DBS 576 Technical Manual

Section 300-Installation

Card Installation Position

The unit cards are installed in the card slots in the DBS 576 main cabinet. Figure 4-
32 shows the positions in which the cards are installed when the system comprises
only one main cabinet. Figure 4-33 shows the positions when the main cabinets are
combined in building-block fashion. Figure 4-34 shows the positions when a DBS
576 base cabinet is connected to a DBS 96.
Figure 4-32. Card installation positions in single cabinet system
Slot
CPC
OP1 to OP2
FS1 to FS12
FS9
FS10
FS11
FS12
*1
: Certain limitations apply (see page 4-36).
*2
: By setting the switch and reprogramming, the PRI/23 card can be set for
T-point (trunks) or S-point (extensions) (see page 5-22, 5-45).
*3
: VSSC card must be installed into FS11. FS12 must be free due to the
size of of the Hard Disk Drive and to allow for heat dissipation.
576-13-300
Trunks Digital
Analog
Extensions Digital
Analog
Options/Audio
applications
DBS 576 (USA), issued 6/2/98
Chapter 4. - Installing Additional Cabinets
Card
CPC96/CPC288/CPC576
SCC, MFR/8, TSW288/TSW576
*1 *1*2
T1 , TBRI/4, PRI/23
LTRK/8, LGTRK/8, TR8, DIDTR/8, E&M/4
*1*2
DEC/8, SBRI/4, PRI/23
AEC/8
*1
MFR/8, CONF
VPU/4, VPU/8
VPU/4, VPU/8
ACD VSSC
*3
VPU/4
4-33