Section 300-Installation
Setting CBLDBS ID Numbers
• When you add a cabinet to the system, it must be given an cabinet ID No. These
• Use the rotary switch (SW1) on the CBL card and CBLDBS card to set the
Considerations
• The DBS 96 cabinet will only accept DEC cards. No other line or trunk card may
• Up to two DBS cabinets may be connected to the DBS 576.
Figure 4-31. Addition of two DBS 96 cabinets
576-13-300
cabinet ID numbers are allocated as shown in Figure 4-23.
Check that the cabinet numbers match the size of system you are setting up.
cabinet ID number.
For details on how to set cabinet ID numbers, see "Setting ID No. of Additional
Cabinets" on page 4-27.
be used with connected to a DBS 576.
DBS 576 (USA), issued 6/2/98
Chapter 4. - Installing Additional Cabinets
4-31