T1 Card (Kx-Tda0187) - Panasonic KX-TDA100 Installation Manual
Hybrid ip-pbx
Hide thumbs
Also See for KX-TDA100:
- Programming manual (912 pages) ,
- Pc programming manual (854 pages) ,
- Features manual (776 pages)
Table of Contents
Advertisement
2.4.6
T1 Card (KX-TDA0187)
Function
1-port T1 trunk card. EIA/TIA standard compliant.
LEDs
RJ45
To NT1 / Extension
Accessories and User-supplied Items
Accessories (included): Ferrite core × 1
User-supplied (not included): RJ45 connector
Notes
•
When connecting this optional service card to the trunk, connect through NT1; do not connect to
the trunk directly.
•
When connecting the RJ45 connector, attach the included ferrite core (except in Canada, where
the ferrite core is not necessarily required). Refer to "2.2.9 Attaching a Ferrite Core".
•
This optional service card can be used for either trunk or extension connection, by setting the A/B
switch or using the connector with appropriate pin assignments.
•
To confirm the trunk connection, refer to "Confirming the Trunk Connection" in "2.13.1 Starting the
Hybrid IP-PBX".
CAUTION
T1 ports are SELV ports and should only be connected to SELV services.
Switch Settings
Switch
A/B
Type
Usage and Status Definition
Slide
Select A (default) for trunk or B for extension use.
2.4 Information about the Trunk Cards
Installation Manual
87
Advertisement
Table of Contents
Troubleshooting
