Figure 4-12 Removing Ac Cable; Removing Ac Cables; Figure 4-13 Installing The Switch Box - Panasonic DBS 576 Technical Manual

Chapter 4. - Installing Additional Cabinets
Installation

Removing AC cables

1. Disconnect the AC cables from the power units and remove the ground wires.
2. Remove AC cable from the cord bracket and cable clamp and discard AC cable.
Figure 4-12. Removing AC cable
Installing Switch Box
1. Position the switch box on the guide lugs in the base cabinet.
2. Secure the switch box with the screw.
Figure 4-13. Installing the Switch Box
4-12 DBS 576 (USA), issued 6/2/98
Section 300-Installation
576-13-300