Chapter 3. Cabinet Installation
This chapter explains how to prepare for a single cabinet installation, how to remove
and replace the cabinet cover, install the battery and install cards.
Installation Location
Guidelines
• Before deciding where to install the single base cabinet, check the external
Figure 3-1. Single base cabinet dimensions and maintenance area
:
Hatched area
Notes
o
nance.
The dimensions shown in parenthesis indicate the dimensions required
o
when the MDF interface cable is wired from the right of the cabinet.
576-13-300
dimensions shown below, the area required for maintenance, and the
"Environmental Conditions" described in Chapter 1 (page 1-4).
indicates the area that should be provided for mainte-
DBS 576 (USA), issued 6/2/98
3-1