Checking The Chord Pattern; Editing A Chord Pattern (Edit Menu); (Chord Pattern View Screen) - Roland FP-E50 Reference Manual

Using the Chord Sequencer

Checking the Chord Pattern

(Chord Pattern View Screen)

You can check the contents of the chord patterns on the Chord
Pattern View screen.
1.
Long-press the Chord Sequencer [Select] button .
The Chord Pattern View screen appears.
Press the [Dec] and [Inc] buttons to change the number of measures
shown.
You can use the [Dec] [Inc] buttons to zoom in and out on the screen.
While the chord sequencer is stopped, you can use the [ ä ] [ å ] [ ç ] [ æ ]
buttons to move the position.
MEMO
On this screen, press the [Enter] button to display the Edit Menu.
For details, refer to "Editing a Chord Pattern (Edit Menu)" (p. 39).
2.
Press the [Exit] button to return to the previous screen .
Playing Back a Chord Pattern from a Specific
Measure
1.
While the chord sequencer is stopped, you can use the
[ ä ä ] [ å å ] [ ç ç ] [ æ æ ] buttons to select the desired measure .
To reset the measure where playback starts to the beginning, long-press
the [Start/Stop] button. This works during playback or when the chord
sequencer is stopped.
2.
Play the chord pattern .
Editing a Chord Pattern
1.
Long-press the Chord Sequencer [Select] button .
The Chord Pattern View screen appears.
2.
Press the [Enter] button .
The Edit Menu appears.
Use the [ ä ä ] [ å å ] buttons to select an item, and press the
3.
[Enter] button .
Item
(Edit Menu)
Write
(Chord Pattern Write)
Chord
(Chord Edit)
Variation
(Variation Edit)
Intro/Ending/Loop
Undo/Redo
Measure
Transpose
Initialize Pattern
Saving a Chord Pattern
1.
Use the Edit Menu to select "Write", and then press the
[Enter] button .
The Chord Pattern Write screen appears.
Use the [ ä ä ] [ å å ] buttons to select where to save the
2.
pattern (the write destination), and press the [Enter]
button .
The Rename screen appears.
39 39
(Edit Menu)
Explanation
Saves the chord pattern as a user pattern.
Configures the chord-related settings.
Sets the Variation and Activity Level.
Sets the intro, ending and loop-related
settings.
Undoes the edit you just made and returns
to the previous state.
Configures the measure-related settings.
Sets the transposition.
Initializes the pattern.
(Chord Pattern Write)