Concluding Steps; Storing Not Used Sata Data Cables - Fujitsu PRIMERGY TX100 S3 Core Edition Upgrade And Maintenance Manual

Cabling

15.3.4 Concluding steps

Perform the following procedures to complete the task:
Ê Insert the HDD cage as described in section
page 62.
Ê Close the side cover as described in section
page 56.
Ê Reconnect the AC power cord to the power supply unit and secure it with a
cable tie as described in section
page 57.
15.4

Storing not used SATA data cables

Figure 152: Securing not used SATA cables
I
If only two hard disk drives are installed, secure the unused SATA data
cables in the cable clamps as shown in the figure.
232
"Connecting the server to the mains" on
Upgrade and Maintenance Manual
"Installing the HDD cage" on
"Installing the side cover" on
TX100 S3 Core Edition