Cabling
15.2
Replacing the power cable
Field Replaceable Units (FRU)
Average task duration: 10 minutes
Figure 146: Power cable T26139-Y4012-V101
15.2.1 Required tools
Preliminary and concluding steps: tool-less
●
Replacing the power cable: tool-less
●
15.2.2 Preliminary steps
Before replacing the power cable, perform the following steps:
Ê Shut down the server as described in section
page
40.
Ê Remove the AC power cord from the cable tie and disconnect it from the
system as described in section
Ê Open the side cover as described in section
page
43.
224
"Disconnecting the power cord" on page
Upgrade and Maintenance Manual
"Shutting down the server" on
"Removing the side cover" on
TX100 S3 Core Edition
41.