Operation Modes - Fujitsu PRIMERGY TX100 S3 Core Edition Upgrade And Maintenance Manual

Channel
Slot ID
1
2
3
4
Table 4: Mounting order - Mirrored Channel Mode: Single CPU

10.1.2 Operation modes

– The maximum performance can be achieved in a symmetric dual-channel
configuration. Therefore both channels have to be populated with the same
amount of memory. The DRAM device technology (1 Gbit / 2 Gbit / 4 Gbit)
may vary from one channel to the other.
– If the amount of memory differs between the two channels, the system board
will run in dual-channel asymmetric mode.
– Regardless of the mode, all DIMMs will run at the highest common
frequency that is allowed by the SPD Data of the DIMMs and the maximum
speed of the selected configuration.
– Single-channel mode is used if one memory module is populated in
DIMM 1A.
TX100 S3 Core Edition
A
2A 1A
o
o
o o
o o
Upgrade and Maintenance Manual
Main memory
B
2B 1B
o
o
o o
121