Installing Accessible Drives; Required Tools; Preliminary Steps - Fujitsu PRIMERGY TX100 S3 Core Edition Upgrade And Maintenance Manual

12.2

Installing accessible drives

Upgrade and Repair Units (URU)
Average task duration: 10 minutes

12.2.1 Required tools

Preliminary and concluding steps: tool-less
●
Installing accessible drives: tool-less
●

12.2.2 Preliminary steps

Before installing an accessible drive, perform the following steps:
Ê Shut down the server as described in section
page 40.
Ê Remove the power cord from the cable tie and disconnect it from the system
as described in section
Ê Bring the server to its horizontal position.
Ê Open the side cover as described in section
page 43.
Ê Remove the optical disk drive as described in section
disk drive (ODD)" on page
TX100 S3 Core Edition
"Disconnecting the power cord" on page
164.
Upgrade and Maintenance Manual
Accessible drives
"Shutting down the server" on
"Removing the side cover" on
"Removing an optical
41.
149