Fujitsu PRIMERGY TX100 S3 Core Edition Upgrade And Maintenance Manual page 213

Ê Enter the Headless server's serial number as the first and only line.
I
Please perform this task with greatest care since the correct
serial number of the system is crucial for the customer's
warranty claims!
– The serial number of the PRIMERGY TX100 S3 Core Edition
server is located on the identification plate on the side cover or top
cover (Japanese market only).
– The serial number can either be entered with or without double
quotes ("...").
– The serial number will be deleted from the USB stick after
successful completion of the conversion process.
Ê Save the PID.txt text file onto the USB stick.
Ê Exit the Windows Notepad application and safely remove the USB stick from
the computer.
Ê Remove any DVD or CD from the DVD drive of the PRIMERGY TX100 S3
Core Edition server.
Ê Terminate all applications and shut down the server.
I
If the server does not shut down properly, press and hold the On/Off
button for five seconds, until the server switches off.
Ê Disconnect the AC power cord from the TX100 S3 Core Edition Server.
Ê Unlatch and remove the side cover as described in section
side cover" on page
Ê Remove all SATA cables from the hard disk drives.
I
This step is necessary in order to ensure that the Headless server will
not boot from any other boot device ahead of the USB stick.
Ê Close the side cover and lock it in place as described in section
the side cover" on page
Ê Reconnect the AC power cord.
Ê Connect the USB stick containing the image tool file and serial number to
the Headless server.
TX100 S3 Core Edition
43.
56.
Upgrade and Maintenance Manual
System board and components
"Removing the
"Installing
213