Removing Memory Modules; Required Tools; Preliminary Steps - Fujitsu PRIMERGY TX100 S3 Core Edition Upgrade And Maintenance Manual

10.3

Removing memory modules

Upgrade and Repair Units (URU)
Average task duration: 5 minutes

10.3.1 Required tools

Preliminary and concluding steps: tool-less
●
Removing memory modules: tool-less
●

10.3.2 Preliminary steps

Before removing a memory module, perform the following steps:
Ê Shut down the server as described in section
page 40.
Ê Remove the AC power cord from the cable tie and disconnect it from the
system as described in section
Ê Bring the server to its horizontal position.
Ê Open the side cover as described in section
page 43.
TX100 S3 Core Edition
"Disconnecting the power cord" on page
Upgrade and Maintenance Manual
Main memory
"Shutting down the server" on
"Removing the side cover" on
41.
125