System board and components
14.1.4 Concluding steps
Perform the following procedures to complete the task:
Ê Dispose of the CMOS battery in accordance with local regulations
concerning special waste.
Ê Install the HDD cage as described in section
page
62.
Ê Close the side cover as described in section
page
56.
Ê Reconnect the AC power cord to the power supply unit and secure it with a
cable tie as described in section
page
57.
196
"Connecting the server to the mains" on
Upgrade and Maintenance Manual
"Installing the HDD cage" on
"Installing the side cover" on
TX100 S3 Core Edition