Basic Information; Upgrading Or Replacing The Processor; Required Tools - Fujitsu PRIMERGY TX100 S3 Core Edition Upgrade And Maintenance Manual

Processor
11.1

Basic information

Supported processors
– Intel Xeon E3-1200 processor series CPUs (Dual and Quad Core)
– "Sandy Bridge" micro-architecture
– Socket type: LGA 1155 package
– Thermal Design Power (TDP) class: 95W
11.2

Upgrading or replacing the processor

Field Replaceable Units (FRU)
Average hardware task duration: 15 minutes
Average software task duration: 5 minutes
V
CAUTION!
Processors are extremely sensitive to electrostatic discharge and must
be handled with care. After a processor has been removed from its
protective sleeve or from its socket, place it upside down on a
nonconducting, antistatic surface. Never push a processor over a
surface.

11.2.1 Required tools

Preliminary and concluding steps: tool-less
●
Removing and installing the processor heat sink:
●
– Phillips PH2 / (+) No. 2 screw driver
Removing and installing the processor: tool-less
●
130 Upgrade and Maintenance Manual
TX100 S3 Core Edition