Power Supply - Fujitsu PRIMERGY TX100 S3 Core Edition Upgrade And Maintenance Manual

6

Power supply

This chapter provides information on how to replace the power supply unit
(PSU).
The PRIMERGY TX100 S3 Core Edition server is equipped with a standard
power supply unit that automatically adjusts to any mains voltage in the range
of 100 VAC to 240 VAC.
V
CAUTION!
The server supports a mains voltage in the range of 100 VAC to
240 VAC. You may only operate the server if its rated voltage range
corresponds to the local mains voltage.
Safety notes
V
CAUTION!
Do not disassemble the power supply unit. Doing so may cause
●
electric shock.
Areas around the power supply unit may remain extremely hot after
●
shutdown. After shutting down the server, wait for hot components to
cool down before removing the power supply unit.
The power supply unit is heavy, so handle it carefully. If you drop it by
●
mistake, injuries may result.
For further safety information, please refer to chapter
●
information" on page
TX100 S3 Core Edition
27.
Upgrade and Maintenance Manual
"Important
73