Applying Thermal Paste - Fujitsu PRIMERGY TX100 S3 Core Edition Upgrade And Maintenance Manual

Processor

11.2.6 Applying thermal paste

I
If the processor upgrade or replacement kit contains a new CPU heat
sink, a thin layer of thermal compound has already been pre-applied to
its lower surface. In this case, please proceed with section
processor heat sink" on page
Figure 79: Thermal paste syringe
One thermal compound syringe (FSP:P304000003) contains thermal paste for
two processors.
In order to determine the correct amount of thermal paste (equal to 1.0 gram),
divide the grey area of the syringe up into two equal segments.
I
Add graduation marks to the syringe using a permanent marker to help
you apply the thermal paste.
140
142.
Upgrade and Maintenance Manual
"Installing the
TX100 S3 Core Edition