Misfeed Removal; Misfeed In The Rspf - Sharp AR-7024 Operation Manual

MISFEED REMOVAL

When a misfeed occurs, the misfeed indicator (
will automatically stop.
Check the blinking misfeed location indicator to identify the location of the misfeed and remove it.
The paper may tear when you remove a misfeed. In this event, be sure to remove all torn pieces of paper from the
Note
machine, taking care not to touch the photoconductive drum (the green part). Any scratches or damage to the
surface of the drum will cause dirty copies.

MISFEED IN THE RSPF

1
Remove the misfed original.
Section A
Open the feeding roller cover and remove the
misfed original from the document feeder tray.
Close the feeding roller cover.
Feeding roller cover
114
) and a misfeed location indicator (
(p.119)
Check sections A, B, and
C in the left shows the
illustration (see the next
page), and remove the
misfed original.
(p.114)
(p.115)
(p.120)
Section B
Open the RSPF and rotate the release roller in
the direction of the arrow to feed the original out.
Close the RSPF and then remove the original.
) will blink and the machine
Roller