Assigned Output Functions - Omron E5CN User Manual

Setting Output Specifications
Direct/reverse
orev
operation
or-r
Operation Level
PV/SP
C
30
0
3-5-3

Assigned Output Functions

Example: E5CN
Parameter name Symbol
out1
Control output 1
assignment
out2
Control output 2
assignment
alm1
Alarm 1 assignment
alm2
Alarm 2 assignment
Note
40
5. Select the "direct/reverse operation" parameter by pressing the M key.
The default is or-r (reverse operation). To select or-d (direct opera-
tion), press the U key.
6. To return to the operation level, press the O key for at least one second.
• Function assignments can be changed by changing the settings for con-
trol and alarm assignments.
• The default function assignments for each output are shown below.
Parameter name
Control output 1 assignment
Control output 2 assignment
Alarm 1 assignment
Alarm 2 assignment
Alarm 3 assignment (E5AN/EN
only)
• Each output is automatically initialized as shown below by changing the
control mode.
With control output 2
Standard Heating/cooling
Control output Control output
(heating) (heating)
Not assigned. (See Not assigned. (See
note 1.) note 1.)
Alarm 1 (See note Alarm 1 (See note
2.) 2.)
Alarm 2 (See note Control output
3.) (cooling) (See note
3.)
(1) There is no control output 2 and no parameter assignment is displayed
for that output.
(2) Alarm 1 becomes the program END output unless the program pattern is
set to OFF.
(3) For the E5AN/EN, alarm 3 is assigned for control output (cooling) (alarm
output 2 is assigned for alarm 2).
In this manual, assigned control outputs and alarm outputs are indicated as
follows: "Control output 1 must be assigned" or "Alarm 1 must be assigned."
Symbol Initial status
out1
Control output (heating)
out2
Not assigned.
alm1
Alarm 1
alm2
Alarm 2
alm3
Alarm 3
Without control output 2
Standard Heating/cooling
Control output Control output
(heating) (heating)
Not assigned. Control output
(cooling)
Alarm 1 (See note Alarm 1 (See note
2.) 2.)
Alarm 2 Alarm 2
Section 3-5