Omron E5CN User Manual page 178

Initial Setting Level
o1-t
Linear Current Output
Function
Setting
See
See
amov
Move to Advanced Function Setting Level
Function
See
See
156
This parameter selects the output type for linear current outputs.
• Select either 4 to 20 mA or 0 to 20 mA.
Transfer type
4-20: 4 to 20 mA
0-20: 0 to 20 mA
■ Related Parameter
Transfer output type (initial setting level): Page 155
• Set the "move to advanced setting level" parameter set value to " 169."
• Move to the advanced setting level either by pressing the M key or O key
or by waiting for two seconds to elapse.
■ Related Parameter
Initial setting/communications protect (protect level): Page 116
A current output must be assigned.
Default
4-20
The "initial setting/communications
protect" parameter must be set to 0.
Section 5-6