Omron E5CN User Manual page 139

Protect Level
pmsk
Parameter Mask Enable
Function
Setting
prlp
Password to Move to Protect Level
Function
Setting
See
See
■ Setting Change Protect
Changes to settings using key operations are restricted.
Set value
OFF Settings can be changed using key operations.
ON Settings cannot be changed using key operations. (The protect level
settings, however, can be changed.)
• The all protect indication (
• This parameter turns the parameter mask function ON and OFF.
Setting range
on: Enabled, off: Disabled
Note A parameter mask can be used to hide the displays of parameters that are not
needed. The parameter mask function is provided by the Setup Tool.
Setup Tool: EST2
This parameter is used to set the password to move to the protect level.
• To prevent setting the password incorrectly, the U and O keys or D and
O keys must be pressed simultaneously to set the password.
Setting range
1999 to 9999
• Set this parameter to 0 when no password is to be set.
■ Related Parameters
Move to protect level (protect level): Page 116
Note Protection cannot be cleared or changed without the password. Be careful not
to forget it. If you forget the password, contact your OMRON sales representa-
tive.
Description
) will light when setting is ON.
This parameter is displayed only
when a parameter mask has been
set from the Setup Tool.
Default
on
Default
0
Section 5-2
117