Omron E5CN User Manual page 170

Initial Setting Level
in-h
Scaling Upper Limit
in-l
Scaling Lower limit
dp
Decimal Point
Function
Setting
See
See
d-u
Temperature Unit
Function
Setting
See
See
148
• These parameters can be used when the input type is set for an analog
input.
• When an analog input is used, scaling is performed. Set the upper limit in
the "scaling upper limit" parameter and the lower limit in the "scaling lower
limit" parameter.
• The "decimal point" parameter specifies the decimal point position of
parameters (set point, etc.) whose unit is EU.
• Scaling Upper Limit, Scaling Lower Limit
Parameters
Scaling upper limit
Scaling lower limit
• Decimal Point
Parameters
Decimal Point Controllers with Thermocouple/Resis-
tance Thermometer Multi-inputs
Controllers with Analog Inputs
Set value
0 0 digits past decimal point
1 1 digits past decimal point
2 2 digits past decimal point
3 3 digits past decimal point
■ Related Parameters
Input type (initial setting level): Page 146
• Set the temperature input unit to either C or F.
Setting range
c: C, f: F
■ Related Parameters
Input type (initial setting level): Page 146
The input type must be set for an
analog input.
Setting range
Scaling lower limit + 1 to 9999
1999 to scaling upper limit
Model
Settings Example
1234
123.4
12.34
1.234
The input type must be set for a tem-
perature input.
Default
c
Section 5-6
Unit Default
None 100
1 None 0
Setting Default
range
0 to 1 0
0 to 3 0