Omron E5CN User Manual page 195

Advanced Function Setting Level
mvse
MV at Stop and Error Addition
Function
Setting
See
See
amad
Auto/Manual Select Addition
Function
Setting
See
See
This parameter sets whether or not the "MV at stop" and "MV at PV error"
parameters are to be displayed.
• Set whether or not the "MV at stop" and "MV at PV error" parameters are
to be displayed.
Setting range
on: Displayed, off: Not displayed
■ Related Parameters
MV at stop, MV at PV error (adjustment level): Page 142
This parameter sets whether the "auto/manual switch" parameter is to be dis-
played.
• Set whether the "auto/manual switch" parameter is to be displayed.
Setting range
on: Displayed, off: Not displayed
■ Related Parameter
Auto/manual switch (operation level): Page 120
Section 5-7
The control must be set to 2-PID
control.
Default
off
The control must be set to 2-PID
control.
Default
off
173