Table of Contents
Advertisement
View Alarm Groups Dialog
This dialog will show the alarm groups that are
assigned to the selected schedule and their
current arming state. The ON and OFF states
indicate that the alarm group is under manual
control. AUTO is under control of the selected
schedule. Therefore the alarm group will be armed
if the schedule is active.
Alarm Groups Dialog
This selection allows setup and
arm/disarm control of the 99
alarm groups. Any number of
point type transmitters can be
assigned to an alarm group in
the Subscriber Database's
Advanced dialog. However each
transmitter can only be assigned
to one alarm group.
An alarm group can be manually
armed and disarmed or
assigned to a schedule to
automatically arm and disarm
the alarm group.
Alarm Group Name
Alarm Group #
Arming State of this Alarm
Group
Off (disarmed)
On (armed)
Automatic by
Schedule
First
Enter a descriptive name to identify the function of the points in this alarm
group.
This is the number of the alarm group (1-99).
The Off, On and .Automatic by Schedule selection will control the arming
state of this alarm group.
Clicking this button will disarm the alarm group. The alarm group will remain off
(disarmed) until manually changed in this dialog to On or Automatic by Schedule.
Clicking this button will arm the alarm group. The alarm group will remain on (armed)
until manually changed in this dialog to Off or Automatic by Schedule.
Clicking this button will assign the alarm group's arming state to be controlled by the
indicated schedule. When the schedule is active (on or armed) the alarm group will be
armed. When the schedule is off (disarmed) the alarm group will be disarmed. Any
number of alarm groups may be assigned to the same schedule.
Clicking this button will take you to alarm group 1.
Security Escort Training
Page 93 of 142
Figure 34: View Alarm Groups dialog
Figure 35: Alarm Groups dialog
Advertisement
Table of Contents
