Change Own User Code - Bosch BE 300 LSN User Manual

Use of menus

Change own user code

1.
Press the "Code" key. Enter the user code (initially user num-
ber + 1357) and confirm your entry with the "OK" key.
2.
Press the "Menu" key.
The first menu "View detector" is displayed.
0
Menu
3.
Use the paging keys to scroll up and down through the menus.
Select the "Change code" menu.
4.
Press the "OK" key.
OK
C
Menu
View detector
C
Menu
Change code
New code
Code ?
5.
Enter the new user code. The first two digits are the same as
the entry under point 1 and appear on the display. The re-
maining digits do not appear on the display.
Confirm your entry with the "OK" key.
OK
6.
Enter the new user code once again and confirm your entry
with the "OK" key.
The new user code is saved.
OK
7.
Press the "Escape" or "Clear" key.
The "Escape" key takes you back one step. Further operations
are then possible.
or
Quit coded mode with the "Clear" key.
The standby image appears on the display.
25
Repeat code
Code ?
C
Menu
Change code
NZ 300 LSN
BOSCH