Table of Contents
Advertisement
Testing
The Test Mode allows a user to test his or her Transmitter anywhere in the protected area. When the user is indoors
in sight of an Indoor Receiver, or outdoors in sight of a Strobe, pressing the buttons in sequence performs a test. If
the test is successful, a small green light will flash on the indoor Receiver, or the Strobe will flash briefly. There will be
no response at all if the test fails. If the test fails, the user should contact the Security Office as soon as possible.
Every successful test is recorded in the Subscriber Database in the Central Console Software and optionally printed
on the hardcopy printer. The Subscriber Database contains all of the information relating to each subscriber, including
the date and time of the most recent test transmission. It is possible to search the Subscriber Database for individuals
who have not performed tests for a specified period of time.
Low Battery Reporting
When the Transmitter is tested, a special "low battery" message is included in the transmission to Central Console if
the Transmitter's battery is in need of replacing. Also, the system will not give a visual or audible response during a
test, indicating that the Transmitter requires service. Low battery alerts are logged at the Central Console.
SEFD1 Transmitter
Calls for Help Even When You Cannot
The SEFD1 Fall Detector and Personal Help Button provides assistance that no
other personal Help Button can offer. The device alerts your emergency
monitoring service automatically when it detects a fall, even if you are unable to
push the Help Button on the device.
The SEFD1 is designed to work in and immediately around your home or
facility. The device must be close enough to a receiver for a help signal to be
received. The coverage area of the device will vary from one location to
another. It is important for you to know the effective range of your device.
The SEFD1 is designed to detect falls that meet certain criteria. It may not
detect every fall, especially slight falls that are generally not disabling. The
SEFD1 Fall Detector device may also generate a fall alarm when you have not
fallen. For example, if the device drops on the floor, it may alert the monitoring
center that you have fallen.
Operation
The SEFD1 device transmits three conditions:
Push Button (Help Button)
Fall
Low Battery
Component Descriptions – Receivers
EA102 Receiver
Features
Receives Transmitter alarms and tests, and relays the information to the Transponder.
Built-in self testing through Buddy Check feature.
Indoor and outdoor security enclosures available.
Indoor enclosure provides confirmation of successful Transmitter test.
(Outdoor enclosures use other type of signaling device, such as a Horn/Strobe.)
Indoor Receivers provide local sounders in alarm events.
Security Escort Training
Page 15 of 142
Advertisement
Table of Contents
