Manually enter the new transmitter ID into the "Transmitter ID" field or using the mouse highlight the old
"Transmitter ID" value and press and hold the "Shift" key and tap the "Insert" key. Then click the "Save" button. A
prompt will appear, asking for a second "Test" to confirm the change. Test the new transmitter again. A green
light should be shown on a nearby receiver and this dialog should automatically be removed from the screen,
confirming the change was successful.
Clear Screen
Output Verification
Synchronize System Time
Utilities Menu
When selected, clears the map of any icons and returns to the default map
display.
When selected, the system is scanned to verify that all alarm outputs are in the
correct state. Any output found in the wrong state is corrected.
Selecting this option on the master computer will cause the time on the slave and
all of the workstation computers to be updated to the master computer's time.
Utilities Menu
Security Escort Training
Page 107 of 142