Table of Contents
Advertisement
Backup Dialog
This dialog allows backups to be made of all of the
databases. Only the databases with a checkmark will be
backed up. Typically all databases should be backed up at
once. Only when they do not fit on one floppy disk should
you save individual databases to one floppy, then switch
floppy disks and repeat the procedure to save the rest of
the files. As insurance against database problems,
multiple backups to different disks should be made
frequently. At least one backup copy should be stored in a
different location from this system (remember to keep this
copy current).
Operators
Subscriber
Transponders
Reports
Master Database
Drive
Slave Database
Drive
Local Database
Drive
Cartridge Disk Drive
Floppy A:
Backup
This is the database of all of the individuals with passwords to operate the system
software and acknowledge alarms.
This database contains all of transmitters assigned in the system.
This database contains the configuration of the transponders, receivers, virtual receivers
and alert units.
This database contains all of the alarm reports and related alarm map screens.
Store the backup files in the Security Escort Master Database path. See the System
Directories and Network Address dialog.
Store the backup files in the Security Escort Slave Database path. See the System
Directories and Network Address dialog.
Store the backup files in the save sub-directory as the Security Escort System
components are stored on this computer (typically C:\ESCORT).
Store the backup files in the "Backup / restore to disk cartridge path" assigned in the
System Preferences dialog. This path may point to a cartridge disk drive, to a local hard
disk or to a network disk drive.
Store the backup files on the floppy disk in floppy disk drive A.
When the backup button is clicked all of the databases selected with a checkmark will be
saved to the destination selected on the right.
Security Escort Training
Page 108 of 142
Backup Dialog
Advertisement
Table of Contents
