Table of Contents
Advertisement
Before Making Copies or Faxing
Positioning Books
When copying an open book or magazine, position the original as detailed
below.
1
Raise the Auto Document Feeder.
2
Place the original face down on the
Original Glass.
Note
Do not place books weighting
more than 3 kg on the Original
Glass. In addition, do not press
down extremely hard on the original, otherwise the machine may
be damaged.
3
Position the original on the Original
Glass so that the corner of the
original aligns with the arrow in the
upper-left corner of the Original
Scales.
4
Gently lower the Auto Document
Feeder.
Note
While scanning a thick book or other three-dimensional object with
the Auto Document Feeder open, do not look directly at the bright
light that may shine through the Original Glass. Although the light
that shines through the Original Glass is bright, it is not a laser
beam and, therefore, is not as dangerous.
5
Specify the desired copy or fax settings.
H
"Making Copies" on page 4-1
H
"Basic Faxing" on page 5-12
6
Press the [Start] key to start the print cycle.
Di1610f
3
3-33
Advertisement
Table of Contents
