Calls Cannot Be Sent - Konica Minolta Di1610f Advanced Information

When a Message Appears

Calls Cannot Be Sent

Symptom
Nothing can be heard from
the connected telephone.
After dialing, the ringing
cannot be heard.
After the [Speaker] key is
pressed, it is difficult to hear
the recipient/caller's voice.
The ringing of the telephone
is too low (loud).
Di1610f
Possible Cause
The cord from the telephone
is not connected correctly to
the main unit.
The telephone cord from the
wall jack is not connected
correctly to the main unit.
Transmitting.
The telephone dialing
system is not set correctly.
The monitoring volume is too
low.
The ringer volume of the
connected telephone is set
too low (loud).
Remedy
Correctly connect the
telephone cord to the main
unit.
Correctly connect the
telephone cord from the wall
jack to the main unit.
Check again after the
transmission is finished.
Correctly set the telephone
dialing system. (p. 7-71)
Increase the monitoring
volume. (p. 7-72)
Adjust the ringer volume of
the connected telephone.
8-31
8