Table of Contents
Advertisement
8
Message
LINE PROBLEM
(Flashing alternately)
CHECK LINE
*COMM.ERROR*
(####)
*REDIAL ALL FAILED*
*MEM.FULL/TX CANCEL*
*MEM.FULL/RX CANCEL*
FILE FULL/TX CANCEL
FILE FULL/RX CANCEL
HANG UP THE PHONE
TEXT
×1.00
ä[A]ü #XXX: EMPTY
TEXT
×1.00
ä[A]ü #XXX: Fax Err
TEXT
×1.00
#XXX: Comm.Err
8-24
Cause
• The telephone dialing
system or telephone
wiring system are not set
correctly.
• The telephone cable is not
attached correctly.
• Communication is not
possible because of some
problem in the machine.
• Communication is not
possible because of a
problem with the recipient/
caller's fax machine.
All redial attempts failed
because either the
recipient's line is busy or
there was no answer.
While sending a fax, the size
of the data for the scanned
image has exceeded the
capacity of the memory.
While receiving a fax, the
size of the data for the
received image has
exceeded the capacity of the
memory.
While sending a fax, the
maximum of number of
managed memory file is
used.
While receiving a fax, the
maximum of number of
managed memory file is
used.
The receiver of the
connected telephone is
lifted.
1
(While specifying copy
settings)
The selected paper tray has
run out of paper.
"#" indicates the paper tray,
and "XXX" indicates the
paper size.
1
A fax error occurred while an
operation was being
performed in Copy mode.
1ä[A]ü
A fax transmission error
occurred while an operation
was being performed in
Copy mode.
When a Message Appears
Action
• Check the telephone
dialing system or
telephone wiring system
and use the appropriate
Utility mode function to
make the correct settings.
• Correctly connect the
telephone cable.
Check the transmission
results.
Check the condition of the
recipient's line, and then try
sending the fax again.
• Retrieve all received
faxes stored in the
memory.
• Send the fax by direct
transmission.
Retrieve all received faxes
stored in the memory.
Retrieve all received faxes
stored in the memory.
Retrieve all received faxes
stored in the memory.
Replace the receiver of the
connected telephone on the
hook.
Either load paper of the
specified size into the
specified paper tray, or press
the [Paper] key and select a
different paper size.
Press the [Fax] key to check
the error condition, and take
appropriate measures.
Press the [Fax] key to check
the error condition, and take
appropriate measures.
Di1610f
Advertisement
Table of Contents
