Table of Contents
Advertisement
6
Specifying F codes
When sending faxes
F codes can be specified when the 10-Key Pad is being used to enter the
fax number of a recipient while sending a fax.
1
Using the 10-Key Pad, enter the fax
number of the recipient.
2
Press the [ ] key, and then use the
10-Key Pad to enter the SUB.
H
A number up to 20 digits long
can be entered for the SUB.
H
To enter an SID, continue with step 3.
H
If an SID will not be entered, continue with step 4.
3
Press the [ ] key, and then use the
10-Key Pad to enter the SID.
H
A number up to 20 digits long
can be entered for the SID.
4
Press the [Start] key to begin scanning and sending the fax.
Programming F codes
F codes can be specified when programming one-touch dial keys or
speed dial numbers.
For details on programming F codes, refer to "Setting Up the Fax
Registration" on page 7-23 in "7 Using the Utility Mode".
6-26
Fax Transmission/Reception Methods
Di1610f
Advertisement
Table of Contents
