Positioning The Original; Positioning Originals Into The Adf - Konica Minolta bizhub PRO C5501 User Manual

Before making copies
8.3

Positioning the original

Use the ADF or original glass to scan the original.
8.3.1

Positioning originals into the ADF

The ADF (Automatic document feeder) automatically feeds up to 100 originals directly to the original glass
area, starting with the top sheet. The ADF should only be used for unstapled, smooth, flat originals.
!
Detail
Be sure not to use unsuitable ADF originals. For details of the original available in the ADF, see
page 3-9.
Positioning the original in normal mode
0 Before placing originals in the tray, be sure the ADF is closed fully. Once closed, do not open the
document feeder, otherwise the selected copy conditions may be altered automatically.
0 Do not load more than 100 sheets of the original or over the limit line indicated on the paper guides;
otherwise the original may be misfed or damaged, or machine trouble may be caused.
0 Copy result may not be satisfactory if the original should not be positioned correctly, especially when
using duplex mode, Staple, Half Fold, or Booklet Pagination. See page 9-3 for details.
1
Arrange the original in order.
2
Position the original FACE UP (with page one UP) in the ADF.
– The direction of the original should conform to the original
direction icon displayed on the Copy Screen.
Up to 100 sheets of the original can be set at a time.
3
Adjust paper guides.
Reminder
Once closed, do not open the document feeder, otherwise the selected copy conditions may be altered
automatically.
bizhub PRO C5501
8
8-11