Table of Contents
Advertisement
7
6
Using the 10-Key Pad, enter the fax
number of the recipient.
H
The fax number can contain a
maximum of 30 digits.
For details on the characters that can be entered. Refer to "To fax
by entering the fax number directly using the 10-Key Pad" on
page 5-2.
H
To enter a SUB, continue with step 7.
H
If a SUB will not be entered, press the [Yes] key after entering the
fax number, and then skip to step 10.
H
If you wish to change the fax number, press the [No] key, and then
enter the correct number.
H
For details on F codes (SUB and SID), refer to "Using F codes" on
page 6-24.
7
Press the [ ] key, and then use the
10-Key Pad to enter the SUB.
H
A number up to 20 digits long
can be entered for the SUB.
H
To enter an SID, continue with step 8.
H
If an SID will not be entered, skip to step 9.
8
Press the [ ] key, and then use the
10-Key Pad to enter the SID.
H
A number up to 20 digits long
can be entered for the SID.
9
Press the [Yes] key.
10
Using the [ ] and [ ] keys, select
the desired modem speed.
11
Press the [Yes] key.
The settings are registered. To
program another one-touch dial
key, repeat steps 3 through 11.
12
Press the [No] key to finish
programming.
The "FAX REGISTRATION" menu
appears again.
7-26
Ö
Ö
Using the Utility Mode
Di1610f
Advertisement
Table of Contents
