To Change/Delete A Programmed Timer Transmission - Konica Minolta Di1610f Advanced Information

Using the Utility Mode

To change/delete a programmed timer transmission

1
Select the "FAX REGISTRATION".
H Refer to "Selecting the "FAX REGISTRATION" menu" on
page 7-24.
2
Press the [4] key from the 10-Key
Pad to select "PROGRAM DIAL".
3
Press the one-touch dial key ([12]
through [15]) programmed with the
timer transmission that you wish to
change or delete.
4
Press the [No] key.
5
Using the [ ] and [ ] keys, select
either "EDIT" or "DELETE", and
then press the [Yes] key.
H
If "EDIT" was selected, the
programmed transmission time is displayed. (Continue with step
6.)
H If "DELETE" was selected, the program dialing settings are deleted
and the "SELECT REGIST.KEY" screen appears again.
6
To change the transmission time,
press the [No] key, and then use the
10-Key Pad to enter the correct
time.
If you do not wish to change the
transmission time, press the [Yes] key.
The recipient is displayed.
Di1610f
Ö
Ö
7
7-41