Table of Contents
Advertisement
6
5
Using the 10-Key Pad, enter the fax
number of the recipient.
H
The fax number of a previously
programmed recipient can also
be specified. Refer to "Dialing" on page 5-1.
6
Press the [Start] key to begin scanning and sending the fax.
H
To stop the transmission, press the [Stop] key.
Once transmission is finished, a beep is sounded.
If the fax could not be sent, the transmission result report is printed
(p. 7-76).
Direct Transmission
If the Memory TX lamp is not lit, the direct transmission is selected. One
page of the document at a time can be scanned, according to the
transmission status. This ensures that even documents with many pages
can be sent.
Note
When faxing using direct transmission, the document should be
loaded into the Automatic Document Feeder. Transmission is not
possible by positioning the document on the Original Glass.
If direct transmission is specified while a fax is being sent or received,
the transmission will be queued.
With direct transmission, multiple recipients cannot be specified.
Direct transmission and timer transmission cannot be performed at the
same time.
6-2
Fax Transmission/Reception Methods
Di1610f
Advertisement
Table of Contents
