Specifying The Setting For "Default Tx; Specifying The Setting For "Header - Konica Minolta Di1610f Advanced Information

Using the Utility Mode

Specifying the Setting for "DEFAULT TX"

1
Select the "TX OPERATION".
H Refer to "Selecting the "TX OPERATION" menu" on page 7-56.
2
Press the [3] key from the 10-Key
Pad to select "DEFAULT TX".
3
Using the [ ] and [ ] keys, select
either "MEM.TX" or "ADF TX", and
then press the [Yes] key.
The "TX OPERATION" menu
appears again.

Specifying the Setting for "HEADER"

1
Select the "TX OPERATION".
H Refer to "Selecting the "TX OPERATION" menu" on page 7-56.
2
Press the [4] key from the 10-Key
Pad to select "HEADER".
3
Using the [ ] and [ ] keys, select
either "ON" or "OFF", and then
press the [Yes] key.
The "TX OPERATION" menu
appears again.
Di1610f
Ö
Ö
Ö
Ö
7
7-59