Table of Contents
Advertisement
Fax Transmission/Reception Methods
6
Fax Transmission/Reception Methods
6.1
Transmission Methods
Memory Transmission
With memory transmission, the document is scanned, then stored in the
memory for transmission (queued transmission).
Memory transmission is selected as the default transmission mode.
For details on sending faxes through memory transmission, refer to "Basic
Faxing" on page 5-12.
To specify Memory TX
1
Press the [Fax] key.
The machine enters Fax mode, and
the fax screen appears.
2
Load the document to be faxed into
the Automatic Document Feeder.
H
Adjust the Document Guide
Plates to fit the size of the
document.
H
Load the document face up.
3
If necessary, change the "Resolution" setting (p. 5-11).
4
Press the [Memory TX] key, and
then check that the Memory TX
lamp lights up.
Note
If the Memory TX lamp is not lit, the direct transmission is selected.
Di1610f
6
6-1
Advertisement
Table of Contents
