Table of Contents
Advertisement
Using the Utility Mode
To change/delete a programmed one-touch dial key
1
Select the "FAX REGISTRATION".
H
Refer to "Selecting the "FAX REGISTRATION" menu" on
page 7-24.
2
Press the [1] key from the 10-Key
Pad to select "ONE-TOUCH DIAL".
3
Press the one-touch dial key that
you wish to change or delete.
4
Press the [No] key.
H
If a one-touch dial key
programmed with a group of fax
numbers or a transmission/
reception function is pressed,
the message shown at the right
appears. To delete the
programmed settings, press the
[No] key. The "FAX
REGISTRATION" menu
appears again.
H
To change the group dialing or program dialing settings, refer to
page 7-33 and page 7-37.
Di1610f
7
7-27
Advertisement
Table of Contents
