Table of Contents
Advertisement
3
No.
Part Name
7
10-Key Pad
8
[Scan] key
9
[Fax] key
10
[Copy] key
11
[Stop] key
12
[Panel Reset] key
13
[123/ABC] key
14
[Start] key
15
[ ] [ ] key
16
[Zoom] key
17
[Paper] key
Ö Ö
18
[ ] [ ] key
19
[Auto/Photo] key
20
[Sort] key
21
[2in1] key
22
[Status] key
23
Memory TX lamp
24
Auto RX lamp
25
[Resolution] key
26
[Speaker] key
3-10
Before Making Copies or Faxing
Description
• Use to enter the number of copies to be made and any other
numeric date.
• Used to enter text such as a name.
• In the Fax mode, use the [
(with pulse dialing) and use the [#] key for accessing an
outside line.
Press to enter Scan mode. The indicator lights up in green to
indicate that the machine is in Scan mode.
(Available only when the Internet Fax & Network Scan Kit is
installed.)
Press to enter Fax mode. The indicator lights up in green to
indicate that the machine is in Fax mode.
Press to enter Copy mode. The indicator lights up in green to
indicate that the machine is in Copy mode.
• Press to stop a print cycle.
• Press to stop a scanning sequence.
• Stops the fax transmission or reception.
• The indicator flashes in orange when the machine is paused
or while printing.
Press to reset all print functions and settings to their defaults.
Press to switch the 10-Key Pad between typing in numbers
and typing in letters.
• Press to start a scanning or print cycle.
• Starts a fax transmission.
• Press to specify the various settings.
• The indicator lights up in green when the machine can
accept print jobs.
• Press to change the zoom ratio in the range between × 0.50
and × 2.00 in × 0.01 increments.
• Press to scan through the various settings and information,
in order.
• Press to specify the various settings.
Press to select a zoom ratio from among those fixed ratios
available as standard.
Press to select the paper tray that contains the desired paper.
• Press to adjust the image density.
• Press to specify the various settings.
Press to change the image density mode.
Press to select the sort function.
Press to select the 2in1 function.
Press to view the counters and transmission results. In
addition, the list of settings specified for each function and the
reports can be printed. (p. 3-34)
Lights up when the memory transmission function is selected.
Lights up when the automatic reception function is selected.
Used to select the image quality (transmission resolution).
Press to answer the call. Press again to hang up.
] key for tone transmission
Di1610f
Advertisement
Table of Contents
