To Fax Using Chain Dialing - Konica Minolta Di1610f Advanced Information

5

To fax using chain dialing

Faxes can be sent to recipients that are specified using any combination
of one-touch dial keys, speed dial numbers, direct input using the 10-Key
Pad, and the [Redial] key.
As an example, the following procedure describes how to specify
recipients using one-touch keys, then using the 10-Key Pad.
1
Press the [Speaker] key.
2
Press the desired one-touch key,
and then press the [Start] key.
3
After the message "SET DOC.
FACE UP" appears, use the 10-Key
Pad to enter the recipient's fax
number.
4
After the message "SET DOC.
FACE UP" appears, load the
document into the Automatic
Document Feeder.
5
Press the [Start] key.
5-6
Faxing
Di1610f